help: SS kumakabyos kadena

bago ba ang middle ring mo at ang cog mo sa likod? yung chain mo ba bago din?

matigas na link, or wala sa chainline. check for both.

OT:

how much for the fireeye spur & ssk?

thanks!!!

May exeprience akong ganyan. i dont know kung pareho tayo pero yung akin was sa likod ang problem, what i did was aligned the dropout forcefully with my bare hand.

I

if you are using ramped cogs, chain and chainrings, may noise talaga, parang nadederail, sometimes un tensioner is not aligned with the cog, pde din chainline is not straight.
try using a 7spd chain para mas wide sya but without the weight penalty of a bmx chain.
to get the chainline dead straight, use a plum line. tie a string to a 5 centavo coin to make an improvised plum, hang your bike vertically with the front wheel on top and hang the string from the chainring to the cog, you should be able to get the chain line dead straight.

na-experience ko yesterday & today yang kumakabyos na kadena...

ang problema is the ramped chainring!

kainis!

now...

can you guys recommend a good single-speed 32T chainring? four bolt-config po... thanks!

(dapat ganito ang true review... yung na-try... hindi yung 'as i can see', 'from the looks of it', 'i think', 'and oh!', 'btw'...achuchuchu...

jaymz, chainline yan.. hehehehe! try mo yung ginawa ni arnie (dirtyjane). kung hindi pa rin ubra, nabasa ko sa kabila na meron daw kay raven. bili na dali!

jaymz wrote:
can you guys recommend a good single-speed 32T chainring? four bolt-config po... thanks!

Koya Kolot

KCNC Non-ramped Single ring 32T 4-bolt, meron ako. PHP2500.00.

@sup: hmmm... na-overlook ka yan ha!
try ko nga ngayon...
AY! meron nga pala akong laser todits sa work!!!! yehey!!!!
thanks! thanks!!!!
update ko kayo asap!

---
@banong: YAY!!!!!

Tanong naman tungkol sa chainline.. dun sa nakagamit ng fire-eye na spacer kit at 18t cog, paano arrangement nung spacers nyo? saan nakalagay yung big spacer na may logo, yung big spacer na walang logo at yung pinaka manipis na spacer? sinubukan ko na ang iba't ibang pwesto nung mga spacers pero parang hindi parin perfect yung chainline. pag back pedal, parang may sumasabit, aligned naman yung jockey wheel sa 18t cog. pag paharap wala naman. pwede ko kayang bawasan or ilipat yung drive side spacer ng BB? yung crank na gamit ko ay fsa moto, mukang clone din ng mga shimano na cranks, mid-ring lang ang gamit. salamat

magku,

sinunod ko lang image sa site nila



pero ngayon, mukhang interchange ko kung kelangan...

kailangan alligned din yung cog & pulley sa chainring. subukan mo dini ilagay sa labas yung chianring sa crankarm (or sa loob kung nasalabas na siya. iba iba din kasi yung design ng crankarms or width ng BB axle so hahanapin mo talaga yung chainline. the more spacers the better. kung marami kang makukuhang bb spacer mas ok din yun kasi dadami ooptions mo. good luck!

magku wrote:Tanong naman tungkol sa chainline.. dun sa nakagamit ng fire-eye na spacer kit at 18t cog, paano arrangement nung spacers nyo? saan nakalagay yung big spacer na may logo, yung big spacer na walang logo at yung pinaka manipis na spacer? sinubukan ko na ang iba't ibang pwesto nung mga spacers pero parang hindi parin perfect yung chainline. pag back pedal, parang may sumasabit, aligned naman yung jockey wheel sa 18t cog. pag paharap wala naman. pwede ko kayang bawasan or ilipat yung drive side spacer ng BB? yung crank na gamit ko ay fsa moto, mukang clone din ng mga shimano na cranks, mid-ring lang ang gamit. salamat

ask ulit...

the kmc chain... k810...



meron bang right or wrong installtion nito?

i put the sexy side (curved) inside (wrapping the cog/chainring)... & the flat-chested side sa labas...
tama ba?

never had that experience on my ss..........
i have ramped 32T chainring and non-ramped cog.... i also have tensioner, da bomb, yun single jockey wheel.

things to check,

tama si joes.
tama si kolot.
tama si max.

things to change
your chain IG or HG... it should be SS specific chain.

hth

bri,
ano cog mo? fireeye o da bomb?

same kami ni vwbeetle na fireeye kasi ang cog...

novatec (online purchase sa US). same thickness ng ibang SS specifig cog. i'll ride tomorrow on SS. pakita ko sayo kung magkita tayo. may 20T ako kung gusto mo pahiram ko sayo.

btw, yun chain ko is kmc din, from paulinas.. 350 to 400 lang halaga. got it 2 years ago. wala pang stretch

sabi ni dandan nung saturday...
tensioner ko raw or chain length...
tirahin ko muna yung tensioner...
pag hindi pa rin i'm buying another chain

Koya Kolot never ako nagka problema sa SS ko...Ramp up chain rings, and SS specific cogs with Surly Tensioner..using also a used 9 speed specific chain..

carefully check the chain line lang, yun ang secret..tanong mo si King..sa kanya ko natutunan yan sa mga posts nya.. been using my SS sa trails at sa terrain ng Subic to Morong Bataan all these time..and I am heavier than you

koya dante,
addressed the chainline na...
i experienced another kabyos when i pedaled the ss up an overpass...
palagay ko nga chain length...ayaw kasi ako ibili nung madir ng haplink eh
i saw something sa net na ginawang push ala-rennen ang pull-tensioner..
i'm trying it later.

jaymz wrote:koya dante,
addressed the chainline na...
i experienced another kabyos when i pedaled the ss up an overpass...
palagay ko nga chain length...ayaw kasi ako ibili nung madir ng haplink eh
i saw something sa net na ginawang push ala-rennen ang pull-tensioner..
i'm trying it later.

Ay oo koya...baka sobrang haba ng chain mo..9 speed ba o yung SS specific na chain gamit mo?

aquifer wrote:Ay oo koya...baka sobrang haba ng chain mo..9 speed ba o yung SS specific na chain gamit mo?

koya,
kmc k810... ss-spec...

zip tie lang katapat niyan. mag baon ka lang ng extra palagi sa tool kit mo in case maputol or kailangan mo putulin (in case of a flat) yung zip tie.

meanwhile, naka align din ba yung tensioner sa cog & chainring?

jaymz wrote:koya dante,
addressed the chainline na...
i experienced another kabyos when i pedaled the ss up an overpass...
palagay ko nga chain length...ayaw kasi ako ibili nung madir ng haplink eh
i saw something sa net na ginawang push ala-rennen ang pull-tensioner..
i'm trying it later.

@king,
yep. dandan said chainlength nga ang prob...
that's what i'm thinking... zip-tying the b*tch!
chainline is good.
thanks!

hehehe...di ko pa nagagamit yung aking KMC na galing kay badeng koya dahil wala pa akong mahanap na half link na specific para don..ayokong matulad sa 'yo.. ...maigi kasi permanent solution...

jaymz, palitan mo na frame..

check mo chain line.. or beter yet, gamit ka ng single speed chain. ung mura lang na nabibili sa LBS.

pag gumamait ka ba ng SS Specific chain no need for tensioner? san ba nakakabili ng SS Specific chain?

Prerequisite ba sa crank set at ss gear?

maxbuwaya wrote:pag gumamait ka ba ng SS Specific chain no need for tensioner? san ba nakakabili ng SS Specific chain?

Prerequisite ba sa crank set at ss gear?

depende sa kung anong combination gagamitin mo.. saka kung sakto dun ung chain mo. Yung sa akin, 32x14, sakto naman ung kadena so no need for a tensioner. pero kung ayaw sumakto yung length ng kadena sa desired combi mo, kelangan mo (siguro) mag tensioner. single speed chain can be bought at any bike shop.. same lang (ata) un sa mga ginagamit for bmx at cruisers na single speed